IRONROCK 13324 WJ JEEP 4" ROCK-LINK LIFT KIT 4inch Iron Rock liftkit USA
STRENGTH: Our subframe is constructed with 1/4" steel and our lower arms are even thicker at 2"x5/16" wall D.O.M. tubing.
CLEARANCE: We tuck our subframe up as tight as possible to gain you the critical extra clearance to keep your Jeep low and your belly high! The lower arm connections at the chassis are as high as possible with still being able to install a bolt through them. The control arms have an inboard bend to clear your tires, so you can steer lock to lock without rubbing on them
ADJUSTABILITY: All the arms have tons of adjustment built in for your stock situation to your stretched crawler.
FLEXIBILITY:Yes, of course we are talking about articulation, and the ROCK-LINK delivers plenty! But we are also talking about flexibility to install other axle combinations with ease. Use this kit with your stock Dana 30 for now, and then bolt in a Dana 44 or Dana 60 down the road!
EASE OF INSTALL: No welding, no cutting, no complicated setup or templates. All you need is a drill, a floor jack, some jack stands and some hand tools. This is a BOLT-IN kit, although if your preferred method of installation is welding, you can do that! (NOTE: most installers opt to cut off the factory lower control arm mounts on the chassis, but it's not required)
KEY PRODUCT FEATURES:
2", 5/16" thick wall D.O.M. lower control arm material
1/4" thick, 3 piece, subframe assembly
Huge tire clearance with inboard control arm bends
Best ground clearance available with super high clearance long arm subframe mounts
Makes axle swaps much simpler!
Maintains caster through the suspension cycle
Easy to install without welding, only simple drilling is required!!! Seriously, you can install this in your driveway in a few hours
Set of 4 new coil springs (4" Lift)
Set of 4 new premium hydro shocks
Set of 2 new extended sway bar links (2 front, 2 rear)
Heavy duty adjustable track bar
Complete front ROCK-LINK long arm package
Heavy duty front long arm subframe assembly
3" Front coil retainer
1" Transfer case drop
All necessary hardware
NOTE: Front 3-link crossmember does not work with CRD models due to a different transmission mount. Modification may be possible but has not been tested and will not be covered by warranty.